80 Chapter3
HP Easytime/XL Tasks
Customizing HP Easytime/XL
1. Press F2 A to open the Actions menu.
2. Press
B for Set Backup Defaults.
A dialog box prompts for more information.
3. Type the file name, group, and account of the job to start before the
scheduled backup.
Use the
Tab key to move from field to field.
4. Type the file name, group, and account of the job to start after the
scheduled backup.
5. Press
F5 OK to set the backup defaults.
The backup defaults selected are displayed on the HP Easytime/XL
Setup screen.
Defaults for Console Messages
With HP Easytime/XL, you do not need a dedicated terminal to view
and respond to console messages. You can monitor console messages
from the Console Management screen within HP Easytime/XL.
Display messages and requests on both the system console and in
HP Easytime/XL, or in HP Easytime/XL only, refer to Figure 3-10.
Figure 3-10 Console Defaults
1. Press
F2 A to open the Actions menu.
2. Press
C for Set Console Defaults.
3. Select the option wanted.
An asterisk (*) marks the selected option.
If you choose to display messages on both the system console and in
HP Easytime/XL, you will not be able to use the system console for
any other application, including HP Easytime/XL.
4. Press
F5 OK to set the console default.
The option selected is displayed on the HP Easytime/XL Setup
screen.
Choose one of the following options:
<>
<*> Display messages in HP Easytime/XL only.
Console Defaults
[ Help ]
[ Cancel ][OK]
Display messages on the System Console and in HP Easytime/XL
