English - 59
MENU FUNCTIONS
6.9 Settings
This selection allows you to carry out changes to the
robotic lawnmower’s general settings.
Proles
With the function Proles, different sets of user settings
can be saved. This means that the settings can be easily
stored and reused if the robotic lawnmower for example
will be used in different gardens. Up to three different
proles can be stored.
Save settings to a Prole
• First make the settings in the mower that will be
stored in the prole.
• Check Enable Proles and press OK.
• Check the prole to be stored, move the cursor with
the up and down arrow keys.
• Press OK.
• Check Save and press OK, followed by arrow key
left and OK. All user settings are now stored in the
selected prole.
• If settings that are not stored to the prole are made,
the symbol * is shown next to the prole name.
Proles
Change name SaveUse
On/Off
Settings
Time &
date
Spiral
cutting
ECO
mode
Country
Cutting
height
calibration
Guide wire
calibration
Reset
all user
settings
IntensityOn/Off
Set time Set date Time format Date format
Language
3012-572
3012-574
