A SERVICE OF

logo

Open as PDF
next previous
English - 83
TROUBLESHOOTING
3. Switch the connections between the guide wire
and the boundary wire in the charging station.
a) Switch connection AL and G1.
If the indicator lamp is lit with a solid green light,
then the break is somewhere on the boundary wire
between AL and the point where the guide wire is
connected to the boundary wire (thick black line in
the illustration).
b) Put AL and G1 back in their original positions.
Then switch AR and G1.
If the indicator lamp is lit with a solid green light,
then the break is somewhere on the boundary wire
between AR and the point where the guide wire is
connected to the boundary wire (thick black line in
the illustration).
Guide
3012-1209
3012-1208