8. Name and format the partition and click Next.
9. Review the file system settings and click Finish to create the logical partition.
Mac OS X
Important: Before reconfiguring a volume, back up your data and drag the old
drive to the trash to un-mount previously defined SteelVine Storage Reference
Design partition. If no hard drives are connected to the Storage Appliance, the
SteelVine Processor disk (8.0 GB Config Disk Media) will appear. Do not remove
or modify that partition. After you configure and partition the new volumes, restore
the backed-up data to the new configuration.
1. Launch Disk Utility from
the Application > Utilities folder.
2. Select a configured disk and click the Partition tab. This procedure illustrates
the BIG Storage Policy configuration, which concatenates the capacity of all hard
drives connected to the SteelVine Storage Reference Design.
3. Select 1 Partition from the Volume Scheme drop-down list.
4. Enter a name for the volume in
the Name field (such as “My BIG disk”.)
13
