Connect to the computer host through USB or eSATA, and turn on the power.
(Instruction will be presented in the following graphs)
Tu rn on the switch of RAID0, LED would keep bright, and the host would be
entering the RAID1 active status.
Tu rn on the switch of RAID1, RAID1 LED would keep
bright, and the host would be
entering the RAID1 active status.
Tu rn on the switch of JBOD, JBOD LED would keep bright, and the host would be
entering the JBOD active status.
Tu rn on the switch of BIG, BIG LED would keep bright, the host would be entering
the BIG active
status.
Hard disk LED"/"sends blue light and has long-lasting lightening, which indicates
the hard disk connection is correct.
Hard disk LED"/"sends the pink light and does not stop glittering, which indicates
the hard disk performing wrong data transmission.
Hard disk LED"/"sends red light and does not stop glittering, which indicates the
hard
disk connecting error.
If you select the USB port connection to a computer host, USB LED will keep
glittering during the data transmission.
If you select the eSATA port connection to a computer, eSATA LED will keep
glittering during the data transmission.
to AC90-240V
USB Port to PC host
eSATA Port to
PC host
E-SATA
USB
AC 90V-240V
4
Connect to the computer host through USB or eSATA, and turn on the power
(Instruction will be presented in the following graph)
