A SERVICE OF

logo

2-66 Service Manual
5021-0XX
5 Reconnect DCN16 and
disconnect cable from
DCN13. On cable, check
for 5 VDC from pin 9 to
ground (you can touch
negative lead of voltmeter
to metal bracket that holds
I/O board to obtain ground.)
Is voltage present and
correct?
LVPS is
providing 5 VDC
to I/O board.
Replace faulty
I/O board. See
I/O board
removal on
page 4-70.
Replace LVPS.
See Low
voltage power
supply (LVPS)
with cage
removal on
page 4-60.
Step Questions / actions Yes No