2-18 Service Manual
5021-0XX
56 Parallel Port <x>
Disabled
56 Std Parallel Port
Disabled
Data has been sent
to printer through a
parallel port, but
parallel port is
disabled.
Press Go to clear message.
Printer discards any data
received through parallel port.
Make sure Parallel Buffer
menu item in Parallel Menu is
not set to Disabled.
57 Configuration
Change
Printer cannot
restore confidential
or held jobs on hard
disk because print
configuration has
changed.
Press Go to clear message.
Note: Messages 57
Configuration Change and
Held Jobs May Not Be
Restored alternate on display.
58 Too Many Flash
Options
Too many flash
memory options are
installed on printer.
Turn off and unplug printer.
Remove excess flash memory.
Plug in printer and turn it on.
61 Defective Disk Printer detects a
defective hard disk.
Press Go to clear message
and continue printing.
Install a different hard disk
before you perform any
operations that require one.
62 Disk Full There is not enough
memory on hard
disk to store data
sent to printer.
Press Go to clear message
and continue processing. Any
information not previously
stored on hard disk is deleted.
Delete fonts, macros, and
other data stored on hard disk.
63 Unformatted
Disk
Printer detects an
unformatted hard
disk.
Press Go to clear message
and continue printing.
Format disk before performing
any disk operations. To format
disk, select Format Disk from
Utilities Menu.
If error message remains, hard
disk may be defective and
require replacing. Install a new
hard disk and format it.
Message Description Action
