A SERVICE OF

logo

17
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
SEC
A
B
48” x 93 1/2”
48” x 93 1/2”
22 1/4” x 93 1/2”
8d 1 1/2” Common Nail X
(Not included)
48” x 93 1/2” x 3/4” Treated PlywoodX
(Not included)
22 1/4” x 93 1/2” x 3/4” Treated Plywood (x1)
(Not included)
1
SEC
1.3
SEC
1.4
ALTERNATIVE SITE PREPARATION: OPTION 1 - WOOD PLATFORM ASSEMBLY (CONT)
Square up the frame by measuring from corner to corner. Measurement A should equal Measurement B.
Cut Plywood into sizes called for on previous page. Arrange the Plywood according to the diagram and nail into
PLACEWITHDXvNAILS0LACEPLATFORMINTHEDESIREDLOCATION)FPLATFORMDOESNOTRESTLEVELONTHEGROUND
BUILDUPLOWPOINTSWITHLOOSEDIRTUNTILPLATFORMISSTABLE$RILLTHREEEVENLYSPACEDvDRAINHOLESINPLYWOOD
BETWEENEACHvXvJOIST
Note: All lumber must be rated for outdoor use.
!
Front End