A SERVICE OF

logo

44
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
SEC
SEC
Lay the edge of Rear Gable 2 (AGI) over Rear Gable 1 (AGH) as shown, and align the four holes.
REAR GABLE ASSEMBLY
AGH
AGI
ADZ
ADZ
SEC
#ONNECT2EAR'ABLES together using four (4) 1/4” x 5/8” Pan-Head Screws (ADZ) as shown.
ADZ (x4)
Note: Only use a hand screwdriver in this step.
!
7.1
7.2
7