Tapping the Power Key 15
E-EQ-MX7OGWW-C MX7 User’s Guide
Tapping the Power Key
Note: Refer to the section titled "Power Modes" in the “MX7 Reference Guide” for information
relating to the power states of the MX7.
Important: Until the main battery and backup battery are completely depleted, the
MX7 is always drawing power from the batteries (On).
When a battery is inserted in the MX7 for the first time press the Power key.
Tapping the Power key places the MX7 immediately in Suspend mode.
Tapping the Power key again immediately returns the MX7 from Suspend.
or
Tap
| Suspend.
55 Key
Power
Key
32 Key
Figure 11 Power Key Location
See section “LED Indicators” and “System Status LED” later in this guide.
Checking Battery Status
Tap the | Settings | Control Panel | Battery icon. Main battery level, backup battery level,
status and other details are displayed.
Entering the Login Name
Note: This option should only be used by Odyssey Clients.
If the LXE Login Utility has been installed, the following screen is presented to the user after a
return from Suspend, a warm reset and a cold reset.
There are three options:
Type the login name and tap OK to continue.
Tap Cancel to use the previously entered user name.
Enter a new login name and tap OK to continue.
