E-EQ-MX7OGWW-C MX7 User’s Guide
Introduction
Overview
The LXE® MX7 is a rugged, portable, hand-held Microsoft® Windows® CE 5.0 equipped mobile
computer capable of wireless data communications. The mobile device can transmit information
using an 802.11 radio and it can store information for later transmission through an RS-232 or
USB port.
The mobile device is vertically oriented and features
backlighting for the display. The touch-screen display
supports graphic features and Windows icons that the
Windows CE 5.0 operating system supports. Keypads are
available in 55-key alphanumeric and 32-key numeric-alpha
versions. Also available is a 5250 55-key keypad overlay.
This device is a Windows CE 5.0 compatible computer that
can be scaled from a limited function batch computer to an
integrated RF scanning computer. A trigger handle is
available as an accessory.
The attached stylus is used to assist in entering data and configuring the mobile device. Protective
film for the touchscreen is available as an accessory.
The MX7 is powered by a 2200 mAh Lithium-Ion main battery pack and an internal NiCd backup
battery.
Important
If the mobile device has AppLock installed, please refer to the “MX7 Reference Guide”,
“Chapter 4 – AppLock” for setup and processing.
Wireless configuration and security parameters are described in detail in the “MX7
Reference Guide”, “Chapter 5 – Wireless Network Configuration”.
Related Manuals
Instructions for setting up the integrated SE824, SE955 or SE1524 scanner barcode reading
parameters, are contained in Chapter 2 of the “Integrated Scanner Programming Guide” on the
LXE Manuals CD or the LXE ServicePass website. Note: The SE955 scanner replaced the SE824
scanner on all MX7’s manufactured after July 2006.
For instructions in setting up the Intermec EV15 linear imager, please refer to Chapter 3 in the
“Integrated Scanner Programming Guide”.
