4. Maintenance
27
4.3 Replacing Consumable Parts
(1) Replacing the fuse
(2)Replacing the stage glass
1. While pushing the stage glass in the direction of the leaf spring, raise the glass at the front edge,
and then remove it.
2. Attach the leaf spring in place and mount new stage glass.
Stage glass
Leaf spring
When a fuse holder is as in the upper left figure
1. Turn off the contour and surface illumination switches and the
power switch, and the pull out the power cord.
2. Insert a screwdriver in the rectangular hole of the fuse holder
and raise the screwdriver grip, then a latch will separate and the
fuse holder will come out from the front.
3. Replace the fuse, and replace the fuse holder.
When a fuse holder is as in the lower left figure
1. Turn off the contour and surface illuminator switches and the
power switch and pull out the power cord.
2. Insert a screwdriver in the rectangular hole on the fuse holder
and turn it counterclockwise, then a latch will separate and a
fuse holder will come out from the front.
3. Replace the fuse, and replace the fuse holder.
㩷
CAUTION
Since the stage glass is pushed forward with the leaf spring, when you remove the stage glass, be
careful not to lose the leaf spring.
