RECEIVE SETTINGS
5 - 12
Registering your Unique Ring Pattern
If you are not sure which ring pattern you have, call your telephone
company. Then assign that pattern in the steps below.
1
Set the machine to MANUAL mode.
2
Press
Features
,
1
,
0
,
1
.
The screen displays the current setting of this feature.
3
Press or to select Mode.
4
Press
Enter/Yes
when the screen displays UNIQUE RING:SET?
5
Press or to select the prestored ring pattern you want to assign and
press
Enter/Yes
. (You will hear each pattern as you scroll through the four
patterns. Be sure to choose the pattern assigned by the Telephone
Company.)
Ring
Pattern
1
2
3
4
Rings
long - long
short - long - short
short - short - long
very long (normal pattern)
6
Press
Stop
to exit.
Once you’ve registered the Unique Ring pattern in your machine, you can
turn this feature on or off. To change the setting, follow steps 1 to 4
above, selecting ON (or OFF).
After you’re sure you’ve set up Unique Ring properly and it is working,
you can reconnect a TAM or have Voice Mail turned back on.
