TX SETTINGS
6 - 13
Setting Up Polling Transmit
Polling Transmit is when you set up your machine to wait with a document
so another fax machine can retrieve it. (See Interrupting Delayed Send and
Polling Transmit Jobs on this page.)
1
Place the document to be retrieved in the feeder.
2
Press
Features
,
1
,
3
,
8
.
3
Press or to choose
POLL:OFF?
SELECT <- -> & SET
POLL TX:ON? and press
Enter/Yes
.
4
Press
1
to select DOC if you want your
1.DOC 2.MEMORY
machine to scan the printed document at
the time it is polled—OR—Press
2
to select MEMORY.
5
Press
1
if you want to select additional settings. The display returns to
the TX SETTINGS menu—OR—Press
2
if you are finished choosing
settings and go to step 6.
6
Press
Send/Receive
.
If you pressed
1
in Step 4, the printed document remains in the document
feeder until your machine is polled. However, you can “interrupt” it to
send another fax.
Interrupting Delayed Send and Polling Transmit
Jobs
You can send a fax or make a copy now, even if you have the machine set
to send documents from the feeder later. However, you cannot use
automatic redial or the Feature mode. (See Delayed Send, page 6-10 and
Setting Up Polling Transmit on this page.)
1
Press
Features
,
1
,
5
.
2
Wait 2 seconds, then remove the documents that are waiting in the
feeder.
3
Place the “new” document you want to
INSERT DOCUMENT
send now in the feeder.
4
Enter the new fax number for the documents you want to send now.
5
Press
Send/Receive
.
6
After the transmission is finished, place the “old” documents back into the
feeder.
7
To restore the Delayed Send and/or Polling.
Press
Features
,
1
,
5
.
