Memory Lock (Feature Expander Required)
Overview
To use Memory Lock, you must first:
Store a Memory Lock ID.
Switch Memory Lock on.
To make Memory Lock more versatile you may choose to receive messages from
select locations into memory or execlude certain select locations from coming into
memory. You may:
Specify the senders whose messages you want to be lock in memory. Do this
by programming the RTI or CSIof these senders
Select the messages to store in memory:
a) All messages from specified senders.
b) All messages except those from specified senders.
If Memory Lock is switched on, the machine will not print any incoming fax
messages. They will be kept in memory until you enter the Memory Lock ID that
you previously stored in the machine. Messages received by Confidential
Reception will not be printed when you input the Memory Lock ID.
Cross-reference Confidential Reception: see page 121.
Storing a Memory Lock ID
This can be any four-digit code (using digits 0 to 9), except 0000.
1. Function 6 2 2 2 2 6 1 and Yes
2. Press until the screen is as shown op-
posite.
3. Yes.
ADVANCED
FEATURES
ADVANCED FEATURES RECEPTION
125
