Closed Network (Transmission)
This feature helps avoid accidentally sending a fax message to a terminal that is
outside your fax network.
The ID Codes of the communicating machines are checked. If they are not the
same, the communication is stopped.
1. Press Function 6 2 2 2 2 6 3 and Yes.
2. Yes.
3. Press until the settings for switch 06 are
shown. The setting that you need to
change is digit 2.
Digit 2 (Double underlined)
0: Off
1: On
4. If you wish to change the setting, press 2
of the ten keypad.
5. Finish: Yes and Function.
NOTE: This feature may not be reliable if you are communicating with a terminal
produced by a different manufacturer.
Cross-references
ID Code: see page 44 . Closed Network (Reception): see page 93.
TRANSMISSION ADVANCED FEATURES
64
