Switching Authorized Reception On/Off
Before you use Authorized Reception, you have to switch it on using Function 62.
If it is switched off, the machine will accept any incoming fax message.
1. Function 6 2 2 2 2 6 2 and Yes.
2. Scroll through the list of features with
until the screen is as shown opposite.
3. Yes.
4. Change the on/off setting by pressing or .
5. Finish: Yes and Function.
Programming the Special Terminals for Authorized Reception
A terminal sending an incoming message always identifies itself to your terminal.
The identification consists of an RTI code or a CSI code. When you specify the
senders for memory lock, you must program a list of these codes. Program the list
using Function 81 called "Special Terminal" (see page 101).
Selecting Whether to Accept or Reject Messages from Special Terminals
You can select either to:
❐ Only accept messages from Special Terminals (i.e. reject all others).
❐ Accept all messages except those from Special Terminals (i.e. reject Special
Terminals).
1. Function 6 2 2 2 2 6 3 and Yes.
2. Yes.
The settings for switch 00 are now
shown on the bottom line of the display.
3. Press until the settings for switch 08 are
shown.
The setting that you need to change is
digit 3 (double underlined).
RECEPTION ADVANCED FEATURES
80