A SERVICE OF

logo

ENGINE 3-51
CRANKCASE
DRIVESHAFT AND GEARSHIFT CAM
Removal
Remove the screws.
Remove the gearshift fork shaft 1, gearshift cam 2 and
gearshift forks 3.
Remove the spacer 4.
Remove the driveshaft left bearing dust seal 5.
Remove the driveshaft left bearing case bolts.
By using suitable size bolts A, remove the driveshaft left
bearing case 6.
Remove the dowel pin.
Remove the driveshaft right bearing case bolts.
• By using suitable size bolts A, remove the driveshaft right
bearing assembly 7.