A SERVICE OF

logo

3-6 ENGINE
Disconnect the following couplers.
3 GP switch lead wire
4 CKP sensor lead wire
5 Ground lead wire
6 Starter motor lead wire
7 Speed sensor lead wire
8 ECT sensor lead wire
Disconnect the ignition coil/plug cap lead wire couplers.
Disconnect the CMP sensor lead wire coupler 9 and regula-
tor/rectifier couplers 0.
Remove the ignition coils/plug caps.
Disconnect the PAIR hoses A.
Disconnect the horn coupler B.
Remove the horn and regulator/rectifier along with their
bracket.
Remove the front engine cover C.
Do not remove the ignition coil/plug cap before dis-
connecting its coupler.
* Do not pry up the ignition coil/plug cap with a screw
driver or a bar to avoid its damage.
* Be careful not to drop the ignition coil/plug cap to
prevent its short or open circuit.