A SERVICE OF

logo

8-10 CHASSIS
REMOVAL AND DISASSEMBLY
Remove the brake calipers.
Loosen two axle pinch bolts 1 on the right front fork leg.
Remove the front axle bolt 2.
Remove the under cowling. (8-5)
Raise the front wheel off the ground and support the motorcy-
cle with a jack or a wooden block.
Loosen two axle pinch bolts 3 on the left front fork leg.
Draw out the front axle and remove the front wheel.
NOTE:
After removing the front wheel, fit the calipers temporarily to the
original positions.
Remove the collar 4.
Do not operate the brake lever while removing the cal-
ipers.
Do not carry out the work with the motorcycle resting
on the side-stand. Do not support the motorcycle with
the exhaust pipe. Make sure that the motorcycle is
supported securely.