A SERVICE OF

logo

3-44 ENGINE
Install the following parts to the gearshift shaft/gearshift arm
as shown in the illustration.
1 Washer 5 Plate return spring
2 Snap ring 6 Washer
3 Gearshift shaft return spring 7 Screw
4 Gearshift cam drive plate
OIL PRESSURE REGULATOR
Inspect the operation of the oil pressure regulator by pushing
on the piston with a proper bar.
If the piston does not operate, replace the oil pressure regula-
tor with a new one.
OIL STRAINER
Inspect the oil strainer body for damage.
Clean the oil strainer if necessary.