4 SSP-PRC001-EN
Condensing Units Options
The 7½ and 10-ton single compressor
models feature single refrigeration
circuitry, lowering job installation
costs by requiring only one set of
refrigerant lines. These units are ideal
for the low cost, new construction
jobs as well as renovation and
replacement buildings.
In addition, Odyssey includes 15 and
20-ton dual compressor units to give
true stand-by protection; if one com-
pressor fails, the second will automat-
ically start-up. Also, the first
compressor can be serviced without
shutting down the unit since the
refrigerant circuits are independent.
Dual compressors are not just for pro-
tection, they also save energy costs.
Most buildings are designed for the
peak load requirements yet the build-
ing usually operates at less than peak
load. During light load conditions,
only one compressor functions to
maintain the space comfort thus
reducing the need for energy. For
instance, the EER of the 15 ton unit at
ARI conditions is 10.1 and at part load
conditions it is 11.6.
Trane split systems have been speci-
fied in thousands of applications and
you’ll find Oydessy will win you even
more jobs with its small manageable
cabinet. This light, compact design
will save time and money for rigging
and installation. And the compactness
will permit Trane’s unit to replace
almost any unit — effortlessly.
Each heat pump unit can operate to
50° F as standard in the cooling mode.
An accessory Head Pressure Control
gives you the capability to operate to
0° F. All heat pumps offer these acces-
sories:
• Head Pressure Control
• Coil Guard Kits
• Isolators both Rubber-in-Shear
and Spring Type
• Anti-Short-Cycle Kit
• Time Delay Relay
Air Handlers Offer More
Flexibility
Flexibility is a key to meeting chang-
ing market requirements. Odyssey
split sytems offer not only heat
pumps but also convertible air han-
dlers. The air handlers can be
installed either vertically in a mechan-
ical room or horizontally above a ceil-
ing. And it doesn’t require any
removal of panels to make either air-
flow application work. These air han-
dlers have a double sloped
condensate drain pan that allows for
either airflow configuration. And the
drain pan can easily be removed for
cleaning. All the air handlers feature
factory installed belt drive and ball
bearing evaporator fans with adjust-
able sheaves for maximum airflow
performance. In fact, the standard
motor on the 10-ton air handler will
deliver 4000 cfm at 1.4" ESP. Plus
oversized motors are available for
higher static applications.
Features and
Benefits
