A SERVICE OF

logo

CODE & PROBLEM PROBABLE CAUSE SOLUTION
Er11 - Open sensor error Open sensor
Check the InP1 setup
parameter. Verify it matches
your sensor.
Check sensor and connections
for a reversed or open sensor. If
the condition causing the error is
resolved, the error will clear.
Er12 - Shorted sensor
Incorrect sensor type
Measuring temperature outside
the sensor range
Check the InP1 setup
parameter. Verify it matches
your sensor.
Check sensor and connections
for a reversed or open sensor. If
the condition causing the error is
resolved, the error will clear.
VC4G & VC6G SERIES FULL SIZE CONVECTION OVENS - TROUBLESHOOTING
F24682 Rev. C (0315) Page 74 of 74