A SERVICE OF

logo

2 - 45
SPEC
CABLE ROUTING
È Fasten the positive battery lead with a plastic
locking tie to the battery stay.
É Fasten the positive battery lead and main fuse
lead with a plastic locking tie to the battery stay.
Ê Insert the front turn signal leads into the inner
panel.
Ë Install the connector so that the ignition coil lead
can be turned outward.
Ì Support the coolant reservoir breather hose with
the hose holder attached to the coolant reser-
voir.
Í Pass the brake cable through the brake cable
guide.
Î Pass the coolant reservoir hose through the hole
of the plate.
Ï Pass the coolant reservoir hose through the
hose guide attached to the coolant reservoir.
Ð Pass the negative battery lead and starter motor
lead through the hose guide attached to the
coolant reservoir.