A SERVICE OF

logo

4 - 98
CHAS
SHAFT DRIVE
EAS00721
MEASURING THE RING-GEAR-TO-
STOPPER-BOLT CLEARANCE
1. Remove:
ring gear bearing housing
(along with the ring gear)
Refer to “ADJUSTING THE RING GEAR
BACKLASH”.
2. Measure:
ring-gear-to-stopper-bolt clearance
a
Out of specification
Adjust.
1
Stopper bolt
2
Ring gear
3. Install:
ring gear bearing housing
(along with the ring gear)
Ring-gear-to-stopper-bolt clear-
ance
0.30 ~ 0.60 mm
EAS00722
ADJUSTING THE RING-GEAR-TO-
STOPPER-BOLT CLEARANCE
1. Remove:
ring gear
1
stopper bolt
2
stopper bolt shim(s)
3
ring gear bearing housing
2. Select:
stopper bolt shim(s)
Stopper bolt shims
Thickness (mm)
0.10 0.15 0.20 0,30
0,40 0,50