Chapter 45 Introducing Commands
ES-4124 User’s Guide
345
protocol-based-
vlan
Displays the protocol based
VLAN settings for the specified
port(s).
3
i p Displays IP related information. 0
arp Displays the ARP table. 3
dvmrp group Displays DVMRP group
information.
3
dvmrp interface Displays DVMRP interface
information.
3
dvmrp neighbor Displays DVMRP neighbor
information.
3
dvmrp prune Displays the DVMRP prune
information.
3
dvmrp route Displays the DVMRP routes. 3
igmp group Displays multicast group details
for each port(s).
3
igmp interface Displays IGMP settings for each
IP interface.
3
igmp multicast Displays details about known and
unknown multicast frames
passing through the Switch on
the specified port(s).
3
igmp timer Displays IGMP counter and timer
settings for each IP interface.
3
iptable all
[IP|VID|PORT]
Displays the IP address table.
You can sort the table based on
the IP address, VLAN ID or the
port number.
3
iptable count Displays the number of IP
interfaces configured on the
Switch.
3
iptable static Displays the static IP address
table.
3
ospf database Displays OSPF link state
database information.
3
ospf interface Displays OSPF interface settings. 3
ospf neighbor Displays OSPF neighbor
information.
3
protocol-based-
vlan
Displays protocol based VLAN
settings on the port(s).
3
route Displays IP routing information. 3
route static Displays IP static route
information.
3
source binding Displays the static bindings (IP to
MAC address) configured on the
Switch.
3
Table 140 Command Summary: Enable Mode (continued)
COMMAND DESCRIPTION PRIVILEGE
