Chapter 45 Introducing Commands
ES-4124 User’s Guide
378
dir <ingress|
egress|both>
Enables port mirroring for
incoming, outgoing or both
incoming and outgoing traffic.
Port mirroring copies traffic from
one or all ports to another or all
ports for external analysis.
13
multicast-limit Enables the port(s) multicast
limit.
13
<pkt/s> Sets how many multicast packets
the port(s) receives per second.
13
name <port-name-
string>
Sets a name for the port(s).
Enter a descriptive name (up to
nine printable ASCII characters).
13
no arp inspection
trust
Disables this port from being a
trusted port for ARP inspection.
13
arp inspection
limit
Resets the ARP inspection rate
to the default (0).
13
bandwidth-limit Disables bandwidth limit on the
port(s).
13
bandwidth-limit
cir
Disables cir bandwidth limits on
the port(s).
13
bandwidth-limit
pir
Disables pir bandwidth limits on
the port(s).
13
bandwidth-limit
egress
Disables egress bandwidth limits
on the port(s).
13
broadcast-limit Disables broadcast storm control
limit on the port(s).
13
dhcp snooping
trust
Disables this port from being a
trusted port for DHCP snooping.
13
dhcp snooping
limit rate
Resets the DHCP snooping rate
to the default (0).
13
diffserv Disables DiffServ on the port(s). 13
dlf-limit Disables destination lookup
failure (DLF) on the Switch.
13
egress-set <port-
list>
Disables the egress port setting. 13
ethernet oam Disables Ethernet OAM on the
port(s).
13
ethernet oam mode Resets Ethernet OAM mode to
the default setting (active) on the
ports.
13
ethernet oam
remote-loopback
supported
Disables Ethernet OAM remote
loop-back capability on the
port(s).
13
flow-control Disables flow control on the
port(s).
13
ge-spq Disables strict priority queuing on
the Gigabit ports.
13
Table 142 interface port-channel Commands (continued)
COMMAND DESCRIPTION PRIVILEGE
