Filter
Top Products
IPF2002PoE User’s Manual/使用手冊
19
Ⅴ. Configuration using Web Browser
Enter the Menu on the IP phone, go to Network/status to retrieve the IP address, then check on the IP address on the
connected computer system (make sure that the address of the IP Phone and the computer are in the same network segment), Then,
type the address http:// Phone-IP-address:9999 in the browser URL address, and login with the user name and password to enter the
configuration setting page. The three default users are “root＂, ＂system＂, ＂user＂. The password is “test＂(user may
change the password).
To save the configuration settings through the website, press “submit＂ after configuring on each page. Then, press the
“save change＂ on the left-hand side column, click on “save＂. After the IP phone restart, it will save all the changes made
through the website.
The following display shows the on-screen instructions for the configuration using the web browser
5.1 Information
Display the IP phone system information, including the firmware version.
Model Name
Product mode
Firmware Version
Firmware Version
Codec Version
Codec Version Date