Filter
Top Products
IPF2002PoE User’s Manual/使用手冊
43
Ⅶ. Frequently Asked Questions (Q&A)
1. How do I know that IPF2002PoE Registration is complete?
A: If IPF2002PoE is registered successfully; the Registration number will be displayed on LCD. If “No Service＂ is
displayed on LCD that means the Registration is not complete. System requires 2 minutes to complete Registration for
IPF2002PoE.
2．After connecting to power source and activating phone device, why do I see “ETHERNET ERROR＂ on my LCD?
A: Check if Ethernet Cable is correctly connected. If it is connected, please check your network connection.
3．Can I dial the phone if a blackout occurs?
A: At this point of time, powering from any of PSE (power sourcing equipment) routers or equipments,
IPF2002PoE will normally work.
4．How to make a phone call?
A: Pick up the handset, after a dial tone, you can dial or make an internet call.
5．How to use “Call Hold＂ function?
A: When you are on a call, press the “Hold＂ key or “Swap＂ key to put the caller on hold; to retrieve
the call, press the “hold＂ key or swap key again.
6．
How to use “Call Waiting＂ Function?
A: When you are on a call, if you hear a dial tone twice that means there is another incoming call for you. If you want to
answer it, press “hold＂ key to pick up the call.
7．How to make a “3-way Conference＂ call?
A: “3-way Conference＂ call
When you are on a phone with party A and you want to invite party B to join your conversation,
Press “hold ＂ key to put party A on hold, and dial Party B＇s number after you hear a dial tone. When party B is
connected, inform party B that there is a “3-way Conference＂ call you like to invite him/her to participate.
a. If party B accepts your invitation, press “Conf＂ key to enter the 3-way conference call
b. If party B rejects your invitation or call forwarding is failed, press “hold＂ key to cancel call forwarding and retrieve the
call back to party A.
8. How to make “Call Transfer＂?
A:
Blind Transfer
Connect a call with party A, press [Hold] to hold party A and press
[Transfer/Flash] key and input party B＇s number.
When the line is connected, “Call Transfer＂ is complete.
B:
Attendant Transfer
Connect a call with party A, press “TRANSFER/FLASH＂ key and input party B＇s number. When the line is connected,
“Call Transfer＂ is complete.