Filter
Top Products
• Auto Keypad Lock: Configure your phone to lock the keypad when it is not in
use. You can select the time delay from the available choices. If you select Off,
the phone will not lock the keypad automatically.
• Main Menu Style: Set the main menu to be displayed as a list or a grid.
• Default Storage Location: Assign either the phone or the memory card as the
location where the phone will save downloaded files.
• TTY Setting: Toggle TTY functionality. Please refer to “TTY Mode” under
Accessibility in this manual for more information about this feature.
• T-coil Setting: Enables you to hear the phone’s audio through a hearing aid with
a telecoil. Please refer to “HAC Mode” under Accessibility in this manual for more
information about this feature.
• Phone Info: View technical information about your phone, including My Device
Number, Version Info, Icon Glossary and Operating System.
Profiles
A profile is a set of configurations appropriate to a specific environment. Each
profile allows you to set the ringtone volume/vibration, the earpiece volume, and
the warning tone.
From the home screen, select Main Menu > Settings > Profiles.
Select a profile and press the Left Soft Key to edit that profile.
• Voice Call Ringtone: Set the voice call ringtone.
• Ringtone Volume: Set the volume of the ringtone.
• Alert Type: Set the ring type (e.g. ring, vibrate and ring).
• Receiver Volume: Set the volume of the receiver.
• Message Tone: Set the notification ringtone for an incoming SMS or
MMS message.
46 Settings
• Key Tone: Enable or disable keypad tones when dialing.
• Warning Tone: Turn the warning tone on or off.
• Power On/Off Tone: Turn on/off the sound that plays while powering on/off
the phone.
• Missed Calls Alert: Enable, disable, and set timing for the missed calls
audible notification.
Call Settings
From the home screen, select Main Menu > Settings > Call Settings.
Earphone Auto Answer: You can configure the phone to answer incoming calls
automatically when an earphone is connected to the phone.
Any Key to Mute: This option allows you to silence the ringtone by pressing any key
when there is an incoming call.
Connection Reminder: When a call connects, you will hear a three-tone beep to
notify you that the connection was successful.
Minute Reminder: When this setting is enabled, you will hear a short beep every
minute while a call is in progress. You will hear the first beep after 50 seconds, then
1 minute 50 seconds, etc.
Send My Caller ID: This function allows you to prevent others from seeing your
phone number when making outbound calls.
Off: The call recipient will not see your phone number.
On: The call recipient will see your phone number.
Set by Network: The network chooses whether to show/hide your
phone number.
Auto Redial: Sets the phone to repeatedly redial, in the event of a busy signal, until
it successfully makes a connection.
47Settings