Filter
Top Products
Voice Mail Notification with Mail Retrieval Service (MRS)
1. The phone sounds a short
beep tone.
To Store the Voice Mail Access Number
Please see To Store Linked Numbers in Phonebook
on page 38, and follow the steps 1 -3 to make a set of
linked numbers. Press ~ ~ @ O G to store.
Up to 80 digits of linked numbers can be stored includ-
ing link mark" = ". You can also add a Name Tag (up to
20 to 24 characters) with your voice mail number. (See
To Store a Name with Phone Number on page 27.)
IHessage
Retrieval
2. Press ca to answer the incoming call, your
phone will be connected to your Voice Message
Service so that you may retrieve your messages.
3. If you choose not to answer the incoming call,
"Message Retrieval" will be stored in the stack
for retrieval of your messages at a later time.
To Display the Number of Voice Mail Messages
~ ESSAGE[*W8)(8l=- ~
TEXT
10/30 USED
To Call Your Voice Mail
1. Press and hold @ .The first number will be dis-
played and dialed.
2. Press @ .The second number will be displayed
and sent in Touch ToneTM signal.
3. The succeeding numbers can be sent sequentially
by pressing @ .
To Review the Voice Mail Access Number
1. Press E) to select the Phonebook Address
Mode.
2. Press @ .The first linked number in @ will be
displayed.
3. Press G (one or more times) to display the re-
maining linked numbers in @ .
Text Messages (Short Message Service)
~
~
c
Example:
1 .Press @ .A mark " * " is
flashing, when a new mes-
sage is available.
2. Press G to select
"VOICE".
The number of messages
in your Voice Mail will be displayed.
3. If a Text Message is attached to the Voice Mail
Notification, the Text Message can be reviewed
by ~ Otherwise this step is skipped.
4. press1::3 .Scroll to "QUIT' r:::-
or "ERASE" the notification I[~E
you reviewed.
5. Press G .
~6. To erase the Voice Mail
Notification, scroll to "YES", L ~
otherwise "NO", and press G
Voice Mail Dialing
You can store one set of linked numbers in a specially
provided memory. and access these numbers with one
touch of the "Voice Mail Access" key @ .
Your phone is able to receive and display Text Mes-
sages of up to 255 characters long. The Text Message
memory stack can store up to 30 messages. When an
SMS message is received, the following occurs.
1. A short beep tone sounds.
2. The ~ indicator at the upper right of the display
flashes to alert you.
~IIII ~(f"~
The display indicates "NEW NEW .MESSAGE
MESSAGE" with animation. ~
3. The Text Message just re-
ceived is stored in the Memory Stack. To review
stored messages, see To Review a Text Message
on page 50.
4. If the Memory Stack is full, any new Text Messages
will not be stored, and you
~ [MORY FULL!
will have the display. t4ew T eHt
.Rejected
~48
49.J