Filter
Top Products
Call Timers
System Features
To help you manage your calls, your phone is equipped
with several Call Timers.
Last Call Timer (F41-1)
1. pressG@3CO.
~ IMERS F41
The talk time of the last call ~ 1 :1~~ M.i3s
will be displayed. ~:2:0UTGOING
2. Press G to exit.
All Calls Timer (F41-3)
1. Press G @3 (0 and @3 .The cumulative
talk time of all incoming TIMERS F41
..1H23M4SS
and outgoing calls will be ~3:~~-!1~~
displayed. ~4. LIFETIME
2. Press G to exit.
Note: The above three timers can be reset to zero by
using "Calf Timer Reset" feature. See page 70.
A/B System Selection (F51 )
This feature permits you to select which Cellular sys-
tem (A or B) your phone uses. When you turn the phone
on, it remembers the last A/B setting and will scan the
radio channels based on that setting.
Leave this setting as it has been preprogrammed un-
less you have a reason to alter the system selection.
To alter the system selection:
1. Press
G.~ (0 .
~ /B FSi .SWITCH
The current mode will be ~v'I!1 ~il ~
displayed. ~ HOME
2. You can change the current mode by O or O .
3. Press G to set.
.AUTO ROAM -Auto Roam Mode
The phone will scan the priority systems first, and then
non-priority systems. For more information as to how
this mode works, see Enhanced Roaming below.
.HOME- Home Only Mode
You can place or receive calls only within your home
area or home affiliated area.
.A-ONL Y -A-System Only Mode
The phone will scan the A-system only and prevents
switching over to the B-system.
.B-ONLY- B-System Only Mode
The phone will scan the B-system only.
Note: If your LCD displays '~UTO ROAM ONL Y". your
phone has been pre-programmed to operate in
the Auto Roam Mode only.
Lifetime Timer (F41-4)
1. Press G ~ (0 and ~ .The cumulative
"lifetime" talk time of all in- TIMERS F41
..12H34MS6S
coming and outgoing calls .4:1..~=*..~1=-
will be displayed. ~1:L~ST C~LL
This timer cannot be reset to zero.
2. Press G to exit.
Clock Indicator (F42)
When the phone is in an area with digital service (Digi-
tal Mode) with this feature enabled, the date and time
are automatically displayed. ICLOCK F42
1. Press G ~ ~ .rVE!III ~
OFF
Enhanced Roaming
Cellular systems are identified by a number called System
Identifier or SID. Your phone is equipped with a Preferred
Roaming List (PRL) which can be programmed by your
Carrier to take advantage of the families of cellular system
(SIDs) that your Carrier owns, or has special billing ar-
rangements with, in different cities.
In your Home System Area, both "No Service" and "Am"
are off in your display. Outside of the Home System in Ser-
vice Areas closely associated with your Carrier, the phone's
display may appear the same as when operating in the
Home System.
2. You can turn this feature on/off by O or O
3. Press G to set.
l62
63..1