Filter
Top Products
To Change Emergency Numbers (F62)
You can program your own emergency numbers. Up to
3 numbers of maximum 32 digits can be stored.
~~ Memory Location
Preset E~ergency Number
#1
#2
#3
911
*911
Blank
~ ECURITY CODE:
OK~
Press
j@3~
Call Restriction (F61 )
This feature permits you to impose various kinds of re-
strictions on outgoing calls. Emergency numbers can
be placed even when this feature is on.
2. Enter the four-digit secu-
=MER. F62 1r-:\ NUMBER I
rity code and press '- F) .l.aJ 911 ~i
~.2 *9)1
3. Press O or O to select the emergency nurT1-
ber memory location (1, 2 or 3) that you want to
change or program, and press G .
4. Enter the new emergency number, and press G .
Note: The emergency number in memory locatiofl 1
will be dialed when the OneTouch Emergency
Call feature is used.
3. You can change the current Restriction mode by
OorQ.
To Change the Security Code (F64)
1. Press G @3 @3 .r65g~~ITv 1
OK~J
3
F
i ~~4
1234
SET~
2. i Enter the four-digit security code and press (
3. The current security code INEW
CODE'"'
is displayed. .
4. Press G to set.
The available Restriction modes are as follows:
.11 DIGITS -11 Digits Mode
Only phone numbers of 11 digits or less are accepted.
Operator assisted dialing is prohibited.
.7DIGITS -7 Digits Mode
Only phone numbers of 7 digits or less are accepted.
Operator assisted dialing is prohibited.
.OPERA TOR -Operator Mode
Operator assisted dialing (0 Origination Call) is prohibited.
.RCLO1-09- Phonebook Address Mode
Only outgoing calls to the numbers stored in the
phonebook address range 01 -09 can be made. If there
is a need to expand this range of addresses please ask
your dealer.
.OFF- Off Mode
No restriction.
4. Enter a new four-digit security code and press (
F-)
6~tli8