Filter
Top Products
BATTEBY "sTAUA'1l011
A .'" 0 nr' .~/A:~
IlVij , IrI1I;;;~UU,U!'
rfi"~
no\11 charging. ..
iL-fii!
To Attach the Battery Pack
G) Insert the hook at the end of the Battery Pack into
the slot at the end of the phone.
@ Press the Battery Pack down to lock the Battery Pack
onto the phone.
4. Then the recharging starts. The display indicates
"now charging" with animation. You can see a
battery level indicator scroll-
ing at the upper-right of the
display.
5. For complete recharging, it
is recommended that the phone is turned off dur-
ing recharging.
6. When the recharging is completed, the display
indicates "fully charged".
7. It is normal that Battery Pack may become a little
warmer during recharging.
The recharging time, from empty to full, depends on
le environmental temperature, O to +35°C.
ti
Battery Type
1!!!I)m Lithium ~ (BTR-450~
Recharging Time
1.5 to 2 h
To Detach the Battery Pack
G) Slide back the Release Latch as shown below.
@ Lift up to remove the Battery Pack from the phone
gently.
Alternatively you can recharge the Phone using AC
Adapter as illustrated below.
~ "
'1
,
u
Note: Do not feed the power to the Phone without Bat-
tery Pack.
To Recharge Battery
Your CDM-4500 has a built-in charger function. To re-
charge the Battery Pack, always install the Battery Pack
to the Phone.
1. Attach the Battery Pack to the Phone.
2. Insert the DC plug of the AC Adapter (CNR-4000)
to the Desktop Holder (DTH-4000). Plug the AC
Adapter to AC outlet.
3. Place the Phone with Battery Pack into the Desk-
top Holder.
"2
13.J