Filter
Top Products
Using Display Features
Issue 2 November 2004 55
To make an important announcement such as an incoming call to someone at
another extension busy on another call
1. While off-hook, press the button or dial the Whisper Page access code, and dial
the extension.
Both people on the other call hear a beep.
Only the person whom you called will hear your announcement.
2. Speak to the person you called.
If that person wants to speak with you, that person can press the button, which
forms a two-party speaking path with your telephone. The other call at the destination
extension is put on hold, and that person cannot hear your conversation. When the call is
complete, the person to whom you were speaking can press the call appearance button of
the held call.
To respond to a Whisper Page
1. When you receive a Whisper Page, you hear a beep, and then you hear the person calling
you. If you want to speak to the Whisper Page caller, press the
button. Your
existing call is placed on hold, and you can speak to the Whisper Page caller.
2. When you finish with the Whisper Page call, press the call appearance of the held call.
Using Display Features
The following features are available only if your system manager administered them as feature
buttons on your 2410 telephone.
Call Timer and Timer
The Call Timer and the Timer features measure elapsed time on a call.
The Call Timer feature, once activated, measures elapsed time automatically on all calls until
you turn off the Call Timer feature.
The Timer feature, which you turn on and off manually, allows you to determine which calls you
want to time on an individual basis.
Check with your system manager to see if you can use either of these features.
WhisperAct
WhisperAnbk
WhisperAnbk