Filter
Top Products
2. Installation procedures
2.6 Stacking projectors
The procedu re below describes how to stack 2 projectors. The procedure to stack 3 projectors is analog.
WARNING: Never stack more than three (3) projectors. Failure to do so can cause serious injury or death.
Necessary tools
8 mm Allen wrench
How to stack 2 projectors?
1. Install the Bottom Carry Handle on the projectors you want to stack . See "Installing the Bo ttom Carry Handle", page 8 .
Note: If the stack is only used for a standing configuration, the bottom projector doesn’t have to be equipped with a Bottom
Carry H a n dle.
2. Position 4 stacking points (reference 1, image 2 -14) on top of the bottom projector. Install the 4 bolts and tighten.
1
Image 2-14
3. Position the top projector with the Bottom Carry Handle on the stacking points of the bottom projector.
16
R5905106 TOP & BOTTOM CARRY HANDLE 28/06/2011