Filter
Top Products
2. Installation procedures
Image 2-23
8. Lift up the truss with projector to the desired height.
Warning: M ake s ure the safety cable is installed with a minimum of play, so that the projector can only fall down for maximum
20 cm . If necessary, wind the cable a few times around the truss before clasping the safety hook around the cable.
WARNING: Never su spend more than two (2) projectors. Failure to do so can cause serious injury o r d eath.
How to suspend 2 projectors from a truss?
1. Stack the 2 p rojectors as des cribed in "Stacking projectors", page 16.
2. Turn the stack upside down.
Install 2 safety c ables around both Bottom Car ry Handles by performing the following p rocedure:
a) Install the safety cables around the Bottom Carry Handle of the bottom projector. Push the safety hooks through the loops.
b) Install the other end of the safety cables around the Bottom Carry Handle of the top projector and clasp the s afety hooks
around the cables as illustrated.
Warning: M ake sure the safety cables are installed with a minimum of play, so that the projector can only fall down for ma ximum
20 cm. If necessary, w ind the cables a few times around the carry handle tubes before clasping the safety hooks
around the cables.
R5905106 TOP & BOTTOM CARRY HANDLE 28/06/2011
21