Filter
Top Products
Doc Ref: DM-868 Rev: 1
The combination of the sixteen-character display and the six function keys on the Forum Phone 310
facilitate access to many of the most commonly used Forum 300 system features. This section of the
guide provides detailed instructions on how to use the Forum Phone 310 .
Note: At installation, extension 11 is set as the default administration phone and it’s best to install
an Operafone Executive at extension 11.
1 Answering a Call
Incoming calls to the Forum Phone 310 are indicated in several ways -
− The tone caller sounds
− The LED alongside the SPEAKER key flashes
− The incoming call is shown on the display
E
x
t n 1
3
2 Making a Call
As well as normal dialling, i.e. entering digits once the line has been selected, the
Forum Phone 310 allows the digits to be pre-dialled before the line is accessed.
This allows the user to check the number before going off-hook by lifting the
handset or pressing the SPEAKER key.
To make an internal call (extension to extension) from the Operfone
Standard
1
1
8
E
x
t n 1
8
To make an external call from the Forum Phone 310
L
i n e 1
1
1
: 2
5
E
x t n
1
4
Internal Call: The call can be answered by
pressing the SPEAKER key or by lifting the
handset.
External Call: The call can be answered by
pressing the SPEAKER key or by lifting the
handset.
With the telephone idle, to make an internal
call, lift the handset or press the SPEAKER key.
Internal dial tone will be heard and the display
will show each digit as it’s dialled. Dial the
extension (or group) number required, e.g. 18.
Note: If Direct Line Selection is enabled for
the extension, external dialling tone will be
heard when the extension goes off-hook.
The display shows the number of the extension
being called.
The call can be ended at any time by
replacing the handset or pressing the
SPEAKER
key to clear the call completely.