Filter
Top Products
Doc Ref: DM-868 Rev: 1
7
9
I n
t r u d
e
c
a
l l
13 Day / Night Changeover
The system can be programmed so that incoming calls ring different extensions or
groups of extensions at different times of the day, e.g. after hours, all calls ring a
night service extension. These changeovers will take place automatically but can
be overridden by an extension that has Day/Night Changeover enabled in
system programming. Normally only the system administrator or reception
extension would have this facility programmed.
Note: At installation, Extension 11 is automatically set as the default
administration phone and Day/Night Changeover will be enabled.
*
0
7
2
#
n
i g
h t r i n
g
i n g i n
g
14 Roaming PIN
Calls made from an extension are subject to the level of access that has been
assigned to the user of that extension. The level of access defines the types of call
the user is permitted to make, i.e. internal calls only, internal and external local
calls only etc. The Roaming PIN feature allows a user to enter a PIN code at
another extension where that telephone will take on their user profile for a time.
Individual extensions need to be enabled in system programming to be able to
accept a Roaming PIN. The system installer/administer will issue Roaming PIN and
user numbers.
*
6
8
*
0
1
*
X
X
X
X
#
C
u
r r e n
t U
s
e
r 0
1
To deactivate Roaming PIN press #68#
Unsuccessful log in to Roaming PIN
Each Roaming PIN user is allowed three attempts to enter the log-in information
correctly after which the user number will be disabled for one hour. During this
time the Roaming PIN will not be usable at any extension.
Dial 79, on receipt of busy tone from the
called extension, to intrude.
Dial *072# from a designated extension
to
switch to night ringing mode, *071# to go
to day ringing mode.
Dial *68*01*xxxx# to get roaming PIN access, as
user 01, with PIN XXXX