Filter
Top Products
Doc Ref: DM-868 Rev: 1
1
1
: 2
5
E
x
t n 1
4
1
2
3
4
5
1
2
3
4
5
6
7
8
To make an external call using the Line key
One of the function keys is a Line key; pressing this key will automatically seize
the line and switch on the handsfree facility. The required number can be dialled
and the display will show the number dialled. The call can be ended at any time by
replacing the handset or pressing the SPEAKER key.
To make a call using the REDIAL key
Pressing the Redial key displays the last number dialled. Successive presses of
the redial key scroll through the last ten numbers dialled from that extension. To
dial one of the numbers, either press the Speaker key or go off hook while the
number is on the display. The system automatically selects a line and redials the
displayed external number. As soon as the external call proceeds, the called party
name, if available in the address book, is displayed.
To redial the last number using the keypad
Redial Last Number can be activated by lifting the handset and dialling *5. The
system will automatically seize an external line and redial the last external
number.
To call a number in the Common Address Book
Common Address Book: Contains numbers accessible to all extensions on the
system. The numbers are programmed by the system administrator through
Browser Based Programming System Settings, System Maintenance programming
mode or Administration (Extension 11).
A number from the Common Address Book may be called by dialling the associated
code, in the range *4000 to *4199. The called party name will be displayed as
soon as the call proceeds.
With the telephone idle, lift the handset or
press the SPEAKER key.
Internal dial tone will be heard and the display
will be blank.
• Dial 0 or select a line using the Line key
• Dial the number – the digits will appear
on the display as they are dialled.
• Once the digits are dialled to line, they
left justify on the display.