Filter
Top Products
118 Menus
By scrolling to a particular group of WAP server settings that
you wish to modify, and then pressing (Option), you can
create a new group of settings, edit the settings, or delete the
settings.
WAP server settings include the fields listed below. Press
(Edit) to edit the setting in each field. When you are finished
with the settings for all fields, you must press in order for
this group of WAP server settings to be saved.
• Profile Name: Gives the WAP server settings a name.
• Homepage: Sets the webpage that the browser will link to
when it is started up. After you enter this item, key in the
URL for the webpage that you would like to use as the
homepage
— for example, http://wap.yahoo.com.
• IP Address: Enter the IP address used for accessing the
mobile Internet.
• Port: Enter the connection port specified by the network
operator
— for example, 9201.
• Bearer Mode: Before connecting to the Internet, you must
set this item according to whether your Internet connection
bearer mode is a GPRS network system or a GSM dialup
network. Doing so will allow you to properly link to the data
network to browse WAP pages, download Java programs,
and so forth. If you are using a GPRS network, you can use
both the GPRS and dialup network to connect to the
Internet. If, however, you are using a dialup network, you
are restricted to using only the dialup network to connect to
the Internet.