Filter
Top Products
155
Printing, Transferring
3
Select images for printing.
Single Images
• When the print type (p. 156) is
set to [Standard] or [Both], select
an image using the left or right
button. You can set the number of
copies (up to 99) to be printed
using the up or down button.
• When the print type (p. 156) is
set to [Index], select an image
using the left or right button and
mark or remove marks from
images using the up or down
button.
•You can use the same
procedures to select images in
index replay (3 images).
All the Images on a CF Card
• Switch to index replay (three
images).
•You can set one copy of each
image to print by pressing the
button, then selecting [Mark
All] using the up or down button,
and pressing the button
again.
• When the print type is set to [Standard] or [Both], the
setting for the number of print copies can be changed for
each image. When [Index] is selected, the print settings
can be deleted. For the instructions on changing settings,
please reread Step 3 from the beginning.
•You can cancel all the settings by selecting [Clear all].
Number of Copies