Filter
Top Products
21
Preparing the Camera, Basic Functions
When the camera’s indicator blinks green, do not turn off
the power or open the battery cover. The camera is
writing, reading, erasing or transmitting an image to or
from the CF card.
•We recommend that you use the optional AC Adapter
Kit ACK600 to power the camera during long usage
sessions (p. 195).
• The optional battery charger kit lets you use recharge-
able NiMH batteries to power the camera (p. 193).
•For important information, see
Battery Performance
(p. 214).
•For information about the Battery and Charger Kit and
AA-size rechargeable NiMH batteries, see the
System
Map
(separate from this guide).
Proper Battery Handling
• Use AA-size alkaline or Canon AA-size NiMH batteries only.
For information on handling the AA-size rechargeable NiMH
batteries, see
Using the Optional Battery Kits
(p. 193).
•Never use manganese or lithium batteries, as these battery
types may overheat in the camera.
• Since the performance of alkaline batteries may differ accord-
ing to brand, the operating time of the batteries you purchase
may not be as long as the batteries that came with the camera.
• Camera operating time may shorten at low temperatures when
alkaline batteries are used. Also due to their specifications,
alkaline batteries may expire faster than NiMH batteries. If you
are using the camera in cold areas or for a long time, we
recommend using Canon AA-size NiMH Battery Kit (a four-
piece set).
• While it is possible to use AA-size nickel-cadmium batteries,
performance is unreliable and their use is not recommended.
• Never mix unused and partially used batteries. Always load
four fresh (or fully recharged) batteries at the same time.