Ecom Instruments Ex-GSM 01 EU Cell Phone User Manual


 
50
Close the cover of the SIM card holder (8). Push the cover of the SIM card
holder toward the upper end of the telephone until it engages (9). Align
the contacts of the battery to the gold contacts and insert it into the tele
-
phone. With the contacts entering first, push the battery into the battery
compartment (10). Close the battery cover (11). Place the telephone in the
lower cover, and push the cover forward while doing so, until it engages
(12).
7.1.2 Charging the battery
Warning: Use only the batteries, chargers and accessories approved for
use with this model by ecom instruments GmbH. Using other types may
result in the forfeiture of the certification or valid warranty or guarantee
and could be hazardous.
Check the model number of the charger before using it in conjunction
with your telephone. This unit can be used with charger types LGH G01
or Carkit CK G01.
Please ensure that the unit is only charged outside
of the Ex-area!
When disconnecting the cable from the accessories, be sure to pull on
the plug and not the cable.
1. Open the lower flap of the
mobile telephone.
2. Connect the charger to a
power socket.
3. Plug the charger connection
into the telephone at the
bottom end.
If the battery is completely discharged, it may take a few minutes before
the LED can be seen and/or before calls can be made. The charging time
depends on the specific charger and battery being used.