Filter
Top Products
Power-Save Mode
Your TicTalk phone goes into power-save mode when it is on
but not in an active call and no button is pushed for a period of
twenty seconds. In power-save mode, the screen displays the
current time in a digital or analog clock face configurable in the
Setup> Display menu on the phone.
You can manually set your phone to power-save mode by
pressing Push Button B from the main menu.
Place a Quick Call in Power-Save Mode
Use the Simple Mode feature to quickly call the
first number in the anytime phone list. This
function can only be initiated from the power-save
mode (time only screen).
Long press Push Button B (hold bottom left button
for two seconds) to bring up the screen to place a
call to the first number in the anytime phone list.
Press Push Button B again to make the call.
If no “Anytime” phone number has been added, or
just the “Emergency” number, the simple mode
screen will be displayed but will not allow a phone
call to be made.
Short press Push Button A to abort the quick call.
Copyright 2005, Enfora L.P. 24