Entering a Phone Number
If anything is shown in the numeric field of the
display, you must erase it before entering the
phone number.
To erase the numeric field, hold down the C (CLEAR) key
until the digits disappear.
A phone number to be called, or stored in memory, is
entered on the numeric keys. The digits you enter are
shown in the numeric field of the display.
Always use the area code!
Note that there are no local calls when you are calling from
a cellular phone; you must always include the area code
before the desired number. The only exceptions to this are
certain cellular service numbers.
Special Function No. 17, Area Code, permits you
to choose an area code that will be automatically
added to a phone number if you do not enter an
area code yourself. You can read more about this
in the chapter Special Functions.
If you enter a wrong digit or a wrong number:
If you enter a wrong digit, you can erase it by pressing C
(CLEAR). You can press C repeatedly to erase several
digits, one at a time.
To erase all digits simultaneously, hold down C until the
digits disappear.
If a number contains more than 10 digits:
If you enter a number with more than 10 digits, the first
digits will disappear from the display.
If you wish to check these digits, press M (MODE) and then
RCL (RECALL).
Making a Call
The SERV indicator must be present in the display.
Enter the phone number, including the area code, and press
Send.
Numeric field
Basic Operation
8