Filter
Top Products
‘‘CANCEL ALL’’ and
‘‘CHANGE PASSWORD’’
-- -- -- ‘‘CHG PASSW’’
will also appear when you are scrolling. The
Cancel All and Change Password services are,
however, described later in this section.
3. When the desired service, for example ‘‘ALL INC’’
(all incoming calls), is displayed, press S.
‘‘ACTIVATE’’ appears.
To cancel the service selected, or reviewing its
status (ON or OFF), scroll with ▲ or ▼.
‘‘CANCEL’’
‘‘STATUS’’
appear in the display.
4. When the desired option, for example ‘‘STATUS’’
is displayed, press S.
5a. If you chose to review the status of a call barring
service, go to step 6.
5b. If you chose to activate or cancel a call barring
service, the question ‘‘PASSWORD?’’ appears.
Enter your password and press S.
6. The message ‘‘WAIT’’ is displayed briefly.
When you have made contact with the GSM
network, either
‘‘BARRING ON’’ or
‘‘BARRING OF’’
comes on for ten seconds in the display.
If you entered the wrong password, the message
‘‘PASSWORD ERROR’’
-- -- -- ‘‘PASSW ERR’’
is displayed.
Cancelling ALL call barring services:
If one or more call barring services are activated, you can
cancel them all by using the Cancel All service.
1. Press M, followed by 3.
‘‘BARRING’’ appears.
2. Press S. ‘‘ALL OUTGOING CALLS’’ appears,
followed by the abbreviation ‘‘ALL OUT’’.
3. Scroll using ▲ or ▼until
‘‘CANCEL ALL’’ appears.
4. Press S. The question ‘‘PASSWORD?’’ appears.
5. Enter your password and press S.
6. The message ‘‘WAIT’’ is displayed briefly.
When you have made contact with the GSM
network,
‘‘BARRING OF’’ comes on for ten seconds in the
display.
If you entered the wrong password, the message
‘‘PASSWORD ERROR’’ -- -- -- ‘‘PASSW ERR’’ is
displayed.
Special Functions
35