Filter
Top Products
Speed Calling
The numbers stored in memory locations 1 - 9 can be
called by just entering the memory location number and
pressing Send. The number appears in the display. If the
number was stored with an accompanying name, the name
will be displayed briefly.
If you called a wrong number, you can press End before the
call has been connected.
Recalling a Number Using Alphabetic
Mode
1. Press RCL. ‘‘RCL’’ is displayed.
2. Press M to select alphabetic mode. The A
indicator flashes.
3. Enter the first letter of the name by pressing the
relevant numeric key once, twice or three times,
depending on the position of the desired letter and
press RCL or
▲
.
If you wish, you can enter up to six letters before
pressing RCL or
▲
.
For example, to recall the number stored under the
name ANTHONY , you can enter A, AN, ANT,
ANTH, ANTHO or ANTHON.
The first name that begins with the letter(s)
entered, is displayed, together with the phone
number.
4. If the desired name is not displayed, scroll forward
by pressing
▲
until you find it. If you scroll past the
name you can move back by pressing
▼
.
5. To call the number displayed, press Send.
Scrolling through the Memory
1. Press RCL. ‘‘RCL’’ is displayed.
2. Press M to select alphabetic mode. The A
indicator flashes.
3. Press ▲ repeatedly to scroll forward through the
names, or press
▼
repeatedly to scroll backward
through the names.
You can enter a letter before pressing ▲ or ▼, to
begin scrolling with this letter.
4. To call the number displayed, press Send.
Reviewing the First Digits if a Recalled
Number Contains More than 10 Digits
If you recall a phone number which contains more than 10
digits, the first digits will be displayed first, followed after a
few seconds by the remaining 10 digits.
If you wish to check the first digits, press M and
then RCL.
Recalling Numbers
23