Ericsson GA628 Cell Phone User Manual


 
Connecting Charger to Mains
Plug the charger into a mains socket. The phone now
starts to charge the battery and you can see the battery
meter in the display move while charging.
Charging the Battery
When you connect the charger to the phone, the bat-
tery is charged. When the battery is fully charged, the
charging stops. You cannot overcharge your battery.
When you are charging the battery you can use your
phone as normal; however the charging time will be
longer.
Connect the charger to the phone.
Connect the charger to the mains.
When the phone is turned on:
The indicator will show a steady green light. To show
that the battery is being charged the battery icon in the
display is filled and emptied continuously.
When the battery is fully charged the battery icon in
the display will show all three bars.
When the phone is turned off:
The indicator will show a steady red light.
To show that the battery is being charged the battery
icon in the display is filled and emptied continuously.
When the battery is fully charged the battery icon in
the display will show all three bars and the indicator
will show a steady green light.
Changing the Front Panel
It is very important that the phone always is used with
a front panel. This will prevent dust and dirt to get into
the phone which will reduce the phone’s functionality.
The Raised Front Panel Markings
The front panel has raised markings around the
left/right arrows and key 5, in order to help you find
the right key on the keypad when
you are not able to see it.
For instance when driv-
ing. These raised
markings must be
facing up when
you mount the front
panel.
Removing the Front Panel
1. Lift the bottom of the front panel with your thumb
and push it towards the display.
Be careful to not bend the front panel too much
since it may break.
2. Pull out the front panel from the phone.
Mounting the Front Panel
1. Insert the top of the front panel into the two slots
above the YES and NO keys. Make sure that the
raised markings on the front panel are facing up.
2. Hold the phone horizontally and drop the panel
onto the face of the phone.
4 LZT 126 1352/x R2A