Filter
Top Products
Making and Receiving Calls
Making a Call
1. Enter the area code and phone number. The phone
number is shown in the display.
If the number is longer than 12 characters, the be-
ginning of the number will be shown as an arrow
(see Figure 8).
To erase a digit, press
CLR. To erase the entire
phone number, press and hold down
CLR for a cou-
ple of seconds.
2. Press
YES to make the call. The display shows
Calling, followed by Connecting and the phone
icon is lit.
Ending a Call
•
Press NO to end the call.
Making an International Call
1. Press and hold the zero key until the international +
prefix is displayed.
2. Enter the country code, area code (without any
leading zero) and the phone number.
3. Press
YES to make the call.
Making an Emergency Call
•
Enter 112 (The international emergency number)
and press
YES.
The 112 emergency number can be used in any country
with or without a SIM Card, provided a GSM network
is within range.
Note! Some operators may require that a SIM Card
has been inserted into the phone and that the PIN code
has been entered.
Retry Function
If the call connection fails or if the number you are
trying to reach is busy, the display shows Retry?.
Press
YES to re-dial the number, otherwise NO.
If you press
YES, the number will automatically be re-
dialled until the call is answered, or 10 times at the
most. If you press any key, or you receive a call, the
re-dialling is interrupted.
If the re-dialling is successful, the phone rings once to
inform you.
Receiving a Call
When you receive a call, the phone rings and the indi-
cator light on the top of the phone blinks green rap-
idly. The display shows Answer?
Answering a Call
•
Press YES to answer the call
• When the call is finished, press NO
Note! Always answer the call before placing the ear-
piece to your ear. If the ring signal is loud it could
damage your hearing.
Rejecting a Call
• Press NO when the phone rings.
The display now looks like this:
BusyTone
If the caller's network supports it, the caller will
hear a busy tone.
If you have been unable to answer, or you have re-
jected a call, the number of the unanswered call will
be shown in the MissedCall menu.
Putting a Call on Hold
Press YES to put a call on hold.
To put the call off hold, press
YES again.
8 LZT 126 1352/x R2A
Figure 8. Number with more than 12 characters.